How To Build A Stuffed Animal Cage

Check out this step-by-step tutorial for how to build a stuffed animal zoo. A stuffed brute zoo is the perfect DIY solution for stuffed animal storage.

Having three girls, we have A LOT of stuffed animals. The Beanie Boo craze didn't assist. Don't fifty-fifty get me started with the Squishmallows! First we stored them in a basket in each of their rooms, then we graduated to hamper sized containers. Fast forward a few years and all their beds are full of fuzzy creatures and the containers are now overflowing. I needed a solution. That'south when I came across a stuffed animal zoo on Pinterest. Now I'grand going to bear witness you how You lot tin build a stuffed brute zoo.

There are a lot of unlike versions out there but I wanted something midsize and one that would exist able to get through the chamber door after it was assembled. I came upwardly with a DIY blimp animal zoo that measures 24″W 10 25.5″D x 36″H.

Here is what you'll need:

This post may contain affiliate links. This means if yous click and buy, I may receive a pocket-size compensation. Please see my total disclosure policy for details.

• Eight 2-ft long 1 x 4'due south
• Four 3-ft long ane ten 2's
• one-iii/4″ woods screws
• 24 screw eyes
• drill
• 36′ of ane/4″ diameter shock string (Amazon–came in 50 ft & a lot of colors)
• paint/brush
• Stickers (or Cricut/Silhouette) for ZOO messages
• ***I also used a countersink drill bit so my spiral heads were deeper (but definitely non necessary) and wood filler.

I started building the stuffed animal zoo by creating the base of operations first. I took four of the ane x 4's and formed a square. I then drilled pilot holes in 2 of them, 1/2″ in from the border. I decided to use a countersink drill bit. This allows for the screw caput to get deeper into the wood. The pic beneath shows what a countersink scrap looks like.

Y'all can meet the difference between a regular pilot hole and the countersink drilled hole above. Either way will piece of work. I simply didn't desire any screws to show once I was finished.

I repeated the same thing with the other four 1 x 4's for the acme of the stuffed animate being zoo.

Adjacent, I screwed a one x 2 piece into each corner of the square base of operations using two screws. And so I set the whole affair on information technology'due south side to attach the tiptop foursquare and stood it back up.

Before painting it, I filled in the screw holes with forest filler to hibernate the screws.

I propped it up on boards to paint. I used iii coats of yellow paint and allow it completely dry.

One time dry, I drilled holes for the spiral eyes and screwed them in. They measured 5.5″ autonomously.

I and then cut 12 pieces of shock cord about iii.5 ft long each and started at the peak, tying information technology through the screw eyes.

I did the same thing at the bottom, making sure it was pulled taut. Then I cut the ends.

To requite it some personality, I downloaded an animal print font from Etsy and printed it on printable vinyl. I used my Cricut to cut them out, but you could practice it past hand or apply whatever type of font stickers from your local craft store.

Lastly, I made a sign using my Cricut. It really gave it that terminal touch on I was looking for!

This turned out so much improve than I imagined. My daughter admittedly loves information technology and the best part is that her room looks so much cleaner! Check out some of my other DIY like my House Number Sign and my Industrial Chalkboard.

What do you call back? Delight leave comments below.

Source: https://diyvibes.net/diy-stuffed-animal-zoo/

Posted by: buisuded1998.blogspot.com

Share this post